日韩久久精品免费视频,91精品国产爱久久蜜桃,日韩国产一区三区

SLW 龍門數字控制高速分切機產品介紹Introduction:
SLW龍門數字控制高速分切機是在吸收歐洲二次分切機型的基礎上，為了滿足國內原材料加工客戶大卷徑放卷而設計開發的寬幅二次分切機。該機適用于分切POF、OPP、PET、CPP薄膜、薄紙的加工，它的分切機主要功能特點:
1、整機由PLC、觸摸屏人機界面集中控制(六伺服電機)。
2、放卷機組與分切機組分開，上走料方式避免污染料膜。
3、液壓系統控制實現擺動上卷，并可實現左右放卷臂的橫向移動(→→/←←/→←/←→)。
4、3"和6"的無軸脹塊式放卷卡頭(機械脹軸)。
5、大輸出力矩、高精度控制的進口交流伺服驅動控制放卷張力。
6、放卷處設置調偏裝置。
7、剃刀懸空分切和刀槽分切兩種方式。
8、配可移動式夾邊展平器、橡膠彎曲展平輥調節料膜平整度。9、交流伺服驅動的主動牽引輥有效地隔斷收、放卷張力之間的相互影響。10、收卷采用四組伺服電機驅動獨立工作組收卷。
11、前后各兩組成品卷的自動翻卷收卷架，可以將成品卷卸在輸送小車上，以便使成品卷能方便進入下道工序。
12、電器系統采用交流同服驅動技術。

13、作業總長檢測，可以設置成品卷收卷長度，達到設定長度時機器自動停機。

This siting machine is mainly to slit such kinds of plastic like POF, OPP,PET, CPP, PE, etc. It is an ideal machine for plastic related supplier.
1. Entire machine is controlled by PLC(6 servo motor), touch screen operation.
2. Unwind and sitting parts are separate, in case of pollute raw material.
3. Hydraulic system can be horizontal movement, as follows: a)(--/----/-)
4. Unwind is shaftless,3 or 6 inch, mechnical shaft.5. Unwind tension is controlled by moment of force, high precision imported servo drive.6. Unwind with offset device.
7. Razor cut, consists of razor and groove shaft.
8. Use spreader roll to spread the film in case of film wrinkles(optional)
9. Drive rolls ,increase the film forwarding capacity and separate the tensioninfluence between unwinding and rewinding station.
10. Rewinds part is consist of 4 independent parts.
11. Two groups of finished product on rewind will be spinning, in order to discharge of material.
12. Electrical system use AC servo drive technology.

13. Meter counting, can preset the length of finished product, auto stoppage.